Welcome to the Online Physio Forum.
Results 1 to 9 of 9
  1. #1
    janecam
    Guest

    Hip Joint range of movement

    Physical Agents In Rehabilitation
    I am looking for a validated and reliable means of measuring joint range of motion for research purposes. Is the goniometer the best we have??

    Similar Threads:

  2. #2
    alanes1
    Guest
    Goniometry or electro-goniometry are the easiest measuring methods but depending on the assessor of varying degrees of accuracy and reliability. The literature tells us an experienced physio should be with 5 degrees of accuracy if it is intratester this will obviously go down if it is inter-tester. Electro-goneometry is about 3 degrees but requires a lot more time and effort to get it right.
    More accurate is radiography but it is difficult to get past Ethics these days because of the radiation.
    Without teaching you to suck eggs if you can standardise the start and finish positions hand held goniometry might be the way to go. In addition it is a clinically relevant tool.
    If you wish to discuss more email me at: [email protected]
    Hope it goes ok.
    Alan Esnouf.


  3. #3
    Forum Member Array
    Join Date
    Sep 2006
    Country
    Flag of India
    Current Location
    india
    Member Type
    Physiotherapist
    Age
    40
    View Full Profile
    Posts
    79
    Thanks given to others
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    44
    hi
    goniometer is ok but electrogoniometry is very accurate tool.
    regards
    ark.


  4. #4
    Matrix Level Physio Array
    Join Date
    Sep 2006
    Country
    Flag of Australia
    Current Location
    London
    Member Type
    Physiotherapist
    View Full Profile
    Posts
    375
    Thanks given to others
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    74
    You could endevour to make a useful and practical clinical measure such as having the subject ly in supine. then with a relaxed knee measure the distance from the inferpole of the patelly to a boney landmark such as the AC joint. As long as you maintain the alignment of one to the other then any change in flexion range sould be able to be measured easily. You would insist that the coccyx remain down on the table to standardise the pelvic postion. 8o Not sure about the extension but let me think about it.

    Any other practical ideas?


  5. #5
    Forum Member Array
    Join Date
    Sep 2006
    Country
    Flag of Armenia
    Current Location
    world
    Member Type
    Other
    View Full Profile
    Posts
    188
    Thanks given to others
    0
    Thanked 9 Times in 9 Posts
    Rep Power
    57
    I am wondering if an acurate measurement of e.g. flexion can be made at all. The reason is that the hip joint does not function in 1 plain but has 3 dimensional movements and therefor e.g. more or less abduction or in/external rotation will affect measurements. The slights difference in muscle tension could easily cause some changes in e.g. abduction would cause changes in flexion as well.


  6. #6
    Matrix Level Physio Array
    Join Date
    Sep 2006
    Country
    Flag of Australia
    Current Location
    London
    Member Type
    Physiotherapist
    View Full Profile
    Posts
    375
    Thanks given to others
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    74
    I would tend to agree with you on this point. And even more could it be suggested that an increase in hip felxion can often be achieved with a corresponding reduction in hip extension?

    We certainly see that excessive external hip joint rotation can be coupled with a reduction in internal rotation, yet overall movement might remain rather constant.

    It might be worth while to discuss what one is actually trying to achieve in measuring hip flexion. Perhaps it is not the best measure for the question being asked?


  7. #7
    Forum Member Array
    Join Date
    Sep 2006
    Country
    Flag of Pakistan
    Current Location
    Pakistan
    Member Type
    Physiotherapist
    View Full Profile
    Posts
    418
    Thanks given to others
    0
    Thanked 1 Time in 1 Post
    Rep Power
    78

    Re: Hip Joint range of movement

    Have a look over the method of goniometric measurements of different joints including the hip joint as an attached file with this post.

    Hip Joint range of movement Attached Files

  8. #8
    Forum Member Array
    Join Date
    Apr 2007
    Country
    Flag of United Kingdom
    Current Location
    Somewhere in cyberspace
    Member Type
    Other
    View Full Profile
    Posts
    20
    Thanks given to others
    0
    Thanked 0 Times in 0 Posts
    Rep Power
    38

    Re: Hip Joint range of movement

    Hi Physiobase,
    Just noticed you mention that a greater degree of external rotation, coupled with a reduction in internal rotation can occur, even though the "total" ROM is still relatively preserved. Just interested if this is usually a pathological finding or merely tends to be incidental? Any ideas why ext rotation is increased when int rotation is diminished? Compensatory? Imbalances?


  9. #9
    Forum Founder Array
    Join Date
    Sep 2000
    Country
    Flag of Australia
    Current Location
    London, UK
    Member Type
    Physiotherapist
    View Full Profile
    Posts
    2,674
    Thanks given to others
    72
    Thanked 114 Times in 54 Posts
    Rep Power
    346

    Lightbulb Re: Hip Joint range of movement

    Quote Originally Posted by guy909uk View Post
    Hi Physiobase,
    Just noticed you mention that a greater degree of external rotation, coupled with a reduction in internal rotation can occur, even though the "total" ROM is still relatively preserved. Just interested if this is usually a pathological finding or merely tends to be incidental? Any ideas why ext rotation is increased when int rotation is diminished? Compensatory? Imbalances?
    Indeed clinically this is usually the case. A hemi-pelvis that is 'flared' out on one side will look like the person is standing in external rotation even though that are in neutral relative to that side of the pelvis. Thus if the same person is then assessed in supine lying in assumed 'neutral' position in the sagittal plane what they are actually doing is lying in internal rotation relative to the actual hemi-pelvic position. On assessment of ROM this would make you think they have reduced internal rotation on examination and increased external rotation.

    Is is very important to look at both sides as it is often a dysfunction on the contralateral side that can be causing this, especially during movements such as running.

    Aussie trained Physiotherapist living and working in London, UK.
    Chartered Physiotherapist & Member of the CSP
    Member of Physio First (Chartered Physio's in Private Practice)
    Member Australian Physiotherapy Association
    Founder Physiobase.com 1996 | PhysioBob.com | This Forum | The PhysioLive Network | Physiosure |
    __________________________________________________ _____________________________

    My goal has always to be to get the global physiotherapy community talking & exchanging ideas on an open platform
    Importantly to help clients to be empowered and seek a proactive & preventative approach to health
    To actively seek to develop a sustainable alternative to the evils of Private Medical Care / Insurance

    Follow Me on Twitter


 
Back to top